Engine Cooling Pumps
​
Flexible & Bronze Impeller Engine Cooling Water Pumps
​
JMP is specialized in manufacturing the HIGHEST QUALITY heavy duty raw water pumps, marine engine cooling pumps and spare parts coming into their 40th Year! These are designed and manufactured especially for engine cooling applications.
You can have CONFIDENCE that when you choose a JMP pump you are truly getting the BEST.
​
Flexible impeller pumps provide an efficient solution to most marine pumping needs.
The primary advantage of a flexible impeller pump is its self-priming capability. As the blades of the impeller are depressed and rebound, they create their own vacuum, drawing fluid into the pumps (see operating principle)
Pumps with dry suction instantly lifts up to 3 meters, up to 9.5 meters when wet. Thus a flexible impeller pump being used in bilge, deck wash, or engine cooling need not be located below the water line or manually primed.
An added feature of flexible impeller pumps is that they can pass fairly large particles without clogging or damaging the pump. This reduces the need for filtering the incoming fluid.
A common feature of all flexible impeller pumps is that they cannot be permitted to run dry for more than 30 seconds. Both the impeller and the seals depend upon the water for lubrication and will soon burn out if run dry.
​
Worn parts are easily replaceable, and service kits are available for all models.
Please contact with us for detailed information and advice.
For Good Pumping
​
-
Pipe runs should always be kept as short and straight as possible, avoiding rising and going over obstructions, as this can create air-locks.
-
Plumbing should be reinforced, non-collapsible hose of the recommended size.
-
Flexible impeller pumps must not be run dry (more than 30 seconds).
-
Bilge pumps and water pumps in particular should always be fastened to the boat structure to ensure their permanent location.
-
Mount Flexible impeller pumps so that some water is left in the pump body when the pump is off. This will prolong impeller life and speed priming.
-
Pumps must be installed with the overboard discharge well above the waterline to avoid water siphoning back into the vessel.
Features
​
-
Heavy Duty Grade Casting - Strong Bronze Body
-
Marine Grade Shaft (3X Series Non-Magnetic)
-
Long Life Mechanical Seal
-
Plug & Play Replacement
-
Longer Lasting High Performance Impellers
-
High Volume Flow Capacity
-
Designed with Easy Replacement of Spare Parts
-
O-Ring Seals at End Covers Providing Better Sealing
Difference Between JMP Flexible Impellers vs Others
​
-
JMP Marine (JMP Corp) performs total "IN HOUSE MANUFACTURING" meaning that they do not outsource any part of the process, including materials, as all the other brands today must do. This ensures the highest standards of quality control making sure that their consumers, as yourself, have the utmost confidence and peace of mind that you are receiving a product without comprise. You will get the QUALITY & PERFORMANCE you are looking for and more!
-
JMP Marine Flexible Impellers DO NOT USE HARMFUL CHEMICALS thereby ensuring the protection of our environment. Products are "ROHS" FREE (ROHS means "Restriction of Hazardous Substances).
-
JMP has developed a unique formula taken over 40 YEARS OF EXPERIENCE producing an impeller mixture that has been specifically designed for sea water & raw water applications resulting in a much more durable longer lasting product vs the Neoprene and Nitrile of other brands today.
-
JMP Marine goes a step further . . . in developing an added mixture they call "WAX BRANDING" which is infused throughout the impeller material and has aided in the result of an impeller that can last up to 3 times longer than all others out there.
-
JMP Marine uses "BRASS INSERTS" vs stainless steel. Even though Brass Insert does take longer, it produces a machined product that is of better quality resulting in a much MORE DURABLE LONGER LASTING PRODUCT
​
JMP MARINE . . . "THE ONLY ONE"
​
#JPR-CT0150 JMP Marine
Replaces Caterpillar 4255421, 425-5421
​
Product Information & Specs:
Uses JMP Impeller P/N: 7100-01K
Replaces Genuine Caterpillar Pump P/N: 4255421, 425-5421
For Caterpillar Engine Model: C1.5, C2.2
​
#JPR-CT0440 JMP Marine
Replaces Caterpillar 4255412, 425-5412, Jabsco 29630-1201,
Perkins W100006
​
Product Information & Specs:
Uses JMP Impeller P/N: 7400-01K
Pump Weight (approx): 8.75 lbs (4.0 kg)
Number of End Cover Srews: 4
Drive Gear Teeth Qty: 33
​
Note: You must confirm that your pump drive gear setup has same number of teeth being 33 which would then match with JPR-CT0440.
Replaces Genuine Caterpillar Pump P/N: 4255412, 425-5412
Replaces Jabsco Pump P/N: 29630-1201
Possibly Replace Jabsco Pump P/N: 29630-1101
Replaces Perkins Pump P/N: W100006
For Caterpillar Engine Model: C4.4
For Perkins Engine Model: M92B
​
Parts Internally Compatible to Genuine: YES & NO
​
Note: You can use the JMP parts Kits listed below to also service OEM / Genuine Brand pumps but MUST use CAT Mechanical Seal p/n: 4204328 (420-4328) in place of JMP Mechanical Seal MCSSET0008.
MCSSET0008 is only for JPR-CT0440 JMP Marine Brand Pump.
Why was Mechanical Seal Changed?
To provide a longer life mechanical seal for longer lasting product and performance
Major Service Kit (All Internal Parts): JSK0143 (*Sold Separately)
Minor Service Kit: JSM0143 (*Sold Separately)
#JPR-CT3054 JMP Marine
Replaces Caterpillar 4255411, 425-5411, Jabsco 29630-1301S,
Perkins W100000
​
Product Information & Specs:
Uses JMP Impeller P/N: 7400-01K
Pump Weight (approx): 8.50 lbs (3.90 kg)
Number of End Cover Srews: 6
Drive Gear Teeth Qty: 28
​
Replaces Genuine Caterpillar Pump P/N: 4255411, 425-5411
Replaces Jabsco Pump P/N: 29630-1301S
Replaces Perkins Pump P/N: W100000
For Caterpillar Engine Model: 3054, 3056
For Perkins Engine Model: M92B
​
Parts Internally Compatible to Genuine: YES & NO
​
Note: You can use the JMP parts Kits listed below to also service OEM / Genuine Brand pumps but MUST use CAT Mechanical Seal p/n: 4204328 (420-4328) in place of JMP Mechanical Seal MCSSET0008.
MCSSET0008 is only for JPR-CT3054 JMP Marine Brand Pump.
Why was Mechanical Seal Changed?
To provide a longer life mechanical seal for longer lasting product and performance
Major Service Kit (All Internal Parts): JSK0142 (*Sold Separately)
Minor Service Kit: JSM0142 (*Sold Separately)
#JPR-CT1800R JMP Marine
Replaces Caterpillar 3754703, 375-4703
Sherwood G2902X, G2902-01
​
Product Information & Specs:
Uses JMP Impeller P/N: 8359-01K
Port Size: 2"
Pump Weight (approx): 45.00 lbs (20.50 kg)
Number of End Cover Srews: 5
Replaces Genuine Caterpillar Pump P/N: 3754703, 375-4703
Replaces Sherwood Pump P/N: G2902X, G2902-01
(Note: G2902-01 is replaced by G2902X)
For Caterpillar Engine Model: C18
​
Parts Internally Compatible to Genuine: YES
Major Service Kit (All Internal Parts): JSK00139 (*Sold Separately)
Minor Service Kit: JSM00139 (*Sold Separately)
Uses JMP Cam Liner Set P/N: CAMSET0032
#JPR-CT3306 JMP Marine
Replaces Caterpillar 5N9357, 5N-9357
Jabsco 17810-1000, 17810-1300
​
Product Information & Specs:
Uses JMP Impeller P/N: 8100-01K
Port Type: 1.50" Flange
Pump Weight (approx): 21.00 lbs (9.55 kg)
Replaces Genuine Caterpillar Pump P/N: 5N9357, 5N-9357
Replaces Jabsco Pump P/N: 17810-1300, 17810-1000
(Note: 17810-1000 is replaced by 17810-1300)
​
For Caterpillar Engine Model: 3304, 3304B, 3306, 3306B, D330C
​
Parts Internally Compatible to Genuine: YES
Major Service Kit (All Internal Parts): JSK002901 (*Sold Separately)
Minor Service Kit: JSM0007 (*Sold Separately)
#JPR-CT3406 JMP Marine
Replaces Caterpillar 3N4851, 3N-4851, 3N4852, 3N-4852, 5N4852, 5N-4852
Jabsco 17970-0100, 17970-0000
​
Product Information & Specs:
Uses JMP Impeller P/N: 8300-01K
Port Type: 2" Flange
Pump Weight (approx): 30.00 lbs (13.64 kg)
Replaces Genuine Caterpillar Pump P/N: 3N4851, 3N-4851, 3N4852, 3N-4852, 5N4852, 5N-4852
Replaces Jabsco Pump P/N: 17970-0100, 17970-0000
(Note: 17970-0000 is replaced by 17970-0100)
​
For Caterpillar Engine Model: 3406, 3406B, 3406C
​
Parts Internally Compatible to Genuine: YES
Major Service Kit (All Internal Parts): JSK002601 (*Sold Separately)
Minor Service Kit: JSM0005 (*Sold Separately)
#JPR-CT3412 JMP Marine
Replaces Caterpillar 7C3613, 7C-3613, 3N7790, 3N-7790, 0R7720, 0R-7720
Gilkes M Series 250/700
Note: Does not include drive gear
​
Product Information & Specs:
Uses JMP Bronze Impeller P/N: IMP0026
Port Type: 2" Flange
Pump Weight (approx): 90.00 lbs (40.91 kg)
Replaces Genuine Caterpillar Pump P/N: 7C3613, 7C-3613 (3N7790, 3N-7790 Replaced by 7C3613, 7C-3613), Re-manufactured P/N: 0R7720, 0R-7720
Note: 7C3613 is Part of Seawater Pump Group Number 3N8561; 3N8561 refers to not only pump but also other parts in that group
Replaces Gilkes Pump P/N: M Series 250/700
​
For Caterpillar Engine Model: 3408, 3408B, 3408C, 3412, 3412C, 3412D
​
Parts Internally Compatible to Genuine: YES
Major Service Kit (All Internal Parts): JSK0124 (*Sold Separately)
Minor Service Kit: JMK0002 (*Sold Separately)
#JPR-CT3508 JMP Marine
Replaces Caterpillar 7C3614, 7C-3614, 5N2600, 5N-2600, 0R7721, 0R-7721
Gilkes M Series 250/700
Note: Does not include drive gear
​
Product Information & Specs:
Uses JMP Bronze Impeller P/N: IMP0063
Port Type: 2" Flange
Pump Weight (approx): 90.00 lbs (40.91 kg)
Replaces Genuine Caterpillar Pump P/N: 7C3614, 7C-3614 (5N2600, 5N-2600 Replaced by 7C3614, 7C-3614), Re-manufactured P/N: 0R7721 0R-7721
Replaces Gilkes Pump P/N: M Series 250/700
​
For Caterpillar Engine Model: 3408, 3408B, 3412, 3412C, 3412D, 3412E, 3508, 3508B, 3508C, 3512, 3512B, 3516B
​
Parts Internally Compatible to Genuine: YES
Major Service Kit (All Internal Parts): JSK0125 (*Sold Separately)
Minor Service Kit: JMK0002 (*Sold Separately)
#JPR-CT3530 JMP Marine
Replaces Caterpillar 7C3614, 7C-3614, 5N2600, 5N-2600, 0R7721, 0R-7721
Gilkes M Series 250/700
Note: Does not include drive gear
​
Product Information & Specs:
Uses JMP Impeller P/N: 8300-01K
Pump Weight (approx): 30.00 lbs (13.64 kg)
Replaces Genuine Caterpillar Pump P/N: 3N1888, 3N-1888
Replaces Jabsco Pump P/N: 17360-1001
​
For Caterpillar Engine Model: D336, D343, D353 C/D/E
​
Parts Internally Compatible to Genuine: YES
Major Service Kit (All Internal Parts): JSK0026 (*Sold Separately)
Minor Service Kit: JMK0005 (*Sold Separately)
#JPR-S7632 JMP Marine
Replaces Caterpillar 4P7168, 4P-7168, 1131109, 113-1109, 1528392, 152-8392, 1674252, 167-4252, 1706116, 170-6116
Sherwood P1710, P1710-01, P1710-02, P1710-04, P1710A, P1710C, P1710X, P1726, P1726X, P1732-01, P1732-02, P1732A, P1732C, P1732X
​
Product Information & Specs:
Uses JMP Impeller P/N: 7608-01K
Port Type: 1.75" Flange
Pump Weight (approx): 14.00 lbs (6.36 kg)
Replaces Genuine Caterpillar Pump P/N: 4P7168, 4P-7168, 1131109, 113-1109, 1528392, 152-8392, 1674252, 167-4252, 1706116, 170-6116
-
4P7168, 4P-7168 for Engine Model 3116 / Sherwood P1710A/C/X
-
1131109, 113-1109 for Engine Model 3126 / Sherwood P1726X (replaced by P1732C)
-
1528392, 152-8392 for Engine Model 3126 / Sherwood P1726X (replaced by P1732C)
-
1674252, 167-4252 for Engine Model(s) 3126B, C7 / Sherwood P1726X (replaced by P1732C)
-
1706116, 170-6116 for Engine Model(s) 3126, 3126B, C7, C9 / Sherwood P1726X (replaced by P1732C)
Replaces Sherwood Pump P/N(s): P1710, P1710-01, P1710-02, P1710-04, P1710A, P1710C, P1710X, P1726, P1726X, P1732-01, P1732-02, P1732A, P1732C, P1732X
-
P1726X replaced by P1732C
​
For Caterpillar Engine Model: 3116, 3126, 3126B, C7, C9
​
Parts Internally Compatible to Genuine: NO (Changes Made to Impeller, WearPlate, Cam, Mechanical Seal, and Shaft for Better Quality & Performance)
Major Service Kit (All Internal Parts): JSK0072 (*Sold Separately)
Minor Service Kit: JMK0002 (*Sold Separately)
#JPR-C0700 JMP Marine
Replaces Cummins 2886308
Sherwood G2607X
​
Product Information & Specs:
Uses JMP Impeller P/N: 8159-01K
Pump Weight (approx): 25.00 lbs (11.40 kg)
Replaces Genuine Cummins Pump P/N: 2886308
Replaces Sherwood Pump P/N: G2607X
​
For Cummins Engine Model: QSB 7.0
​
Parts Internally Compatible to Genuine: YES
Major Service Kit (All Internal Parts): JSK0137 (*Sold Separately)
Minor Service Kit: JSM0137 (*Sold Separately)
#JPR-C0830 JMP Marine
Replaces Cummins 3967246, 4937162, 4937275
Sherwood G2610, G2610X, G2603, G2603X, G2601, G2601X, G2601-02
​
Product Information & Specs:
Uses JMP Impeller P/N: 8159-01K
Pump Weight (approx): 25.00 lbs (11.40 kg)
Replaces Genuine Cummins Pump P/N: 3967246, 4937162, 4937275
Replaces Sherwood Pump P/N: G2610, G2610X, G2603, G2603X, G2601, G2601X, G2601-02
​
For Cummins Engine Model: QSC8.3, QSL9.0
​
Parts Internally Compatible to Genuine: YES
Major Service Kit (All Internal Parts): JSK0137 (*Sold Separately)
Minor Service Kit: JSM0137 (*Sold Separately)
#JPR-C1025 JMP Marine
Replaces Cummins 3907458, 3912019
Sherwood M71, M70
​
Product Information & Specs:
Uses JMP Impeller P/N: 7300-01K
Port Type: Hose 1 1/4" or 32mm
Pump Weight (approx): 10.00 lbs (4.55 kg)
Replaces Genuine Cummins Pump P/N: 3907458, 3912019
Replaces Sherwood Pump P/N: M71, M70
​
For Cummins Engine Model: 4B3.9M, 4B3.9D(M), 4BT3.9M, 4BT3.9-D9(M), 4BTA3.9M, 4B5.9M, 6B5.9M, 6B5.9-D(M), 6BT5.9M, 6BT5.9-D(M)
​
Parts Internally Compatible to Genuine: NO (*changes made for better performance & quality: Mechanical Seal, Shaft, Bearing Housing, Retaining Ring, Screw for Cam, Oil Seal, Slinger)
Major Service Kit (All Internal Parts): JSK0047 (*Sold Separately)
Minor Service Kit: JSM0047 (*Sold Separately)
#JPR-C1040 JMP Marine
Replaces Cummins 3010336, 3278137
Jabsco 7420-0004, 7420-0101
Northern Lights 25-14801
​
Product Information & Specs:
Uses JMP Impeller P/N: 8001-01K
Port Type: Hose 1.25"
Pump Weight (approx): 24.00 lbs (10.90 kg)
Replaces Genuine Cummins Pump P/N: 3010336, 3278137
Replaces Jabsco Pump P/N: 7420-0101, 7420-0004
Replaces Northern Lights Pump P/N: 25-14801
​
For Cummins Engine Model: 855 SERIES, N855M, NT855M, NT855-D(M), NTA855M, N855, NH220, NH250, VT555
​
Parts Internally Compatible to Genuine: NO (*changes made for better performance & quality: Impeller & Shaft)
Major Service Kit (All Internal Parts): JSK0020 (*Sold Separately)
Minor Service Kit: JSM0020 (*Sold Separately)
#JPR-C1050 JMP Marine
Replaces Cummins 217308
Jabsco 18200-0001
​
Product Information & Specs:
Uses JMP Impeller P/N: 8300-01K
Pump Weight (approx): 30.00 lbs (13.64 kg)
Replaces Genuine Cummins Pump P/N: 217308
Replaces Jabsco Pump P/N: 18200-0001
​
For Cummins Engine Model: VTA903, VT903M
​
Parts Internally Compatible to Genuine: NO (*changes made for better performance & quality)
Major Service Kit (All Internal Parts): JSK0049 (*Sold Separately)
#JPR-C1100 JMP Marine
Replaces Cummins 3349392, 5260393, 4929178
Sherwood G2903X, G2903-01, G2903-02
​
Product Information & Specs:
Uses JMP Impeller P/N: 8359-01K
Port Type: Flange 2"
Pump Weight (approx): 35.00 lbs (15.91 kg)
Replaces Genuine Cummins Pump P/N: 3349392, 4929178, 5260393
Replaces Sherwood Pump P/N: G2903X, G2903-01, G2903-02
​
For Cummins Engine Model: QSM11
​
Parts Internally Compatible to Genuine: YES
Major Service Kit (All Internal Parts): JSK0080 (*Sold Separately)
Minor Service Kit: JSM0023 (*Sold Separately)
#JPR-C1900 JMP Marine
Replaces Cummins 3049158, 3074540
Gilkes 44955-052
Note: Does not include drive gear
​
Product Information & Specs:
Uses JMP Bronze Impeller P/N: IMP002601
Port Type: Flange 2"
Pump Weight (approx): 90.00 lbs (40.91 kg)
Drive Gear P/N: GEA0015 (*Sold Separately)
Replaces Genuine Cummins Pump P/N: 3049158, 3074540
Replaces Gilkes Pump P/N: 44955-052
​
For Cummins Engine Model: K19, KT19M, KTA19M, KTA19M3/M6, KTA19-D(M), KTA19-D(M1)
​
Parts Internally Compatible to Genuine: YES
Major Service Kit (All Internal Parts): JSK0122 (*Sold Separately)
Minor Service Kit: JMK0001 (*Sold Separately)
#JPR-C1905 JMP Marine
Replaces Cummins 3866609
Jabsco 18770-0003
​
Product Information & Specs:
Uses JMP Impeller P/N: 9001-01K
Pump Weight (approx): 44.00 lbs (20.00 kg)
Replaces Genuine Cummins Pump P/N: 3866609
Replaces Jabsco Pump P/N: 18770-0003
​
For Cummins Engine Model: K19, K38, KT19M, KTA19M, KTA19M3/M6, KTA19-D(M1), QSK19, QSK19-M
​
Parts Internally Compatible to Genuine: YES
Major Service Kit (All Internal Parts): JSK0069 (*Sold Separately)
Minor Service Kit: JSM0022 (*Sold Separately)
#JPR-C3800 JMP Marine
Replaces Cummins 3049157, 3085649, 3897669
Gilkes
Note: Does not include drive gear
​
Product Information & Specs:
Uses JMP Bronze Impeller P/N: IMP002603
Port Type: Flange 2"
Pump Weight (approx): 90.00 lbs (40.90 kg)
Replaces Genuine Cummins Pump P/N: 3049157, 3085649, 3897669
​
For Cummins Engine Model: K38, KT38M, KTA38M, KTA50M
​
Parts Internally Compatible to Genuine: YES
Major Service Kit (All Internal Parts): JSK0123 (*Sold Separately)
Minor Service Kit: JMK0001 (*Sold Separately)
#JPR-S7608 JMP Marine
Replaces Cummins 5268375, 4948142, 3974455
Sherwood P2701X, P2702-01, P2706-01, P2708X, P2710-01
​
Product Information & Specs:
Uses JMP Impeller P/N: 7608-01K
Port Type: Flange 1.75"
Pump Weight (approx): 11.00 lbs (5.00 kg)
Replaces Genuine Cummins Pump P/N: 5268375, 4948142, 3974455
Replaces Sherwood Pump P/N: P2701X, P2702-01, P2706-01, P2708X, P2710-01
​
For Cummins Engine Model: QSB5.9, QSB6.9
​
Parts Internally Compatible to Genuine: NO (changes to Impeller, Wear Plate, Cam, Mechanical Seal, and Shaft for Better Performance & Quality)
Major Service Kit (All Internal Parts): JSK0068 (*Sold Separately)
Minor Service Kit: JSM0002 (*Sold Separately)
#JPR-S7627 JMP Marine
Replaces Cummins 3897194, 3964767
Sherwood P1727C, P1727, P1727X
​
Product Information & Specs:
Uses JMP Impeller P/N: 7608-01K
Port Type: Flange 1.75"
Pump Weight (approx): 15.00 lbs (6.82 kg)
Replaces Genuine Cummins Pump P/N: 3897194, 3964767
Replaces Sherwood Pump P/N: P1727, P1727A, P1727C, P1727FB, P1727FB-01, P1727FB-02, P1727X
​
For Cummins Engine Model: 6CT, 6CTA8.3M (JWAC), 6CTA8.3M2, & QSC engines
​
Parts Internally Compatible to Genuine: NO (changes made to Impeller, Wear Plate, Cam, Mechanical Seal, & Shaft for Better Quality & Peformance)
Major Service Kit (All Internal Parts): JSK0067 (*Sold Separately)
Minor Service Kit: JSM0002 (*Sold Separately)
#JPR-S7630 JMP Marine
Replaces Cummins 3866493, 3897691, 3964765, 5265994, 5265995, 5265996
Sherwood P1730, P1730X, P1730-01, P1730-02, P1730F-01, P1730F-02, P1730A, P1730C, P1730X, P1731, P1731-01, P1731-02, P1731F-01, P1731F-02, P1731-04
​
Product Information & Specs:
Uses JMP Impeller P/N: 7608-01K
Port Type: Flange 1.75"
Pump Weight (approx): 15.25 lbs (6.82 kg)
Replaces Genuine Cummins Pump P/N: 3866493, 3897691, 3964765, 4003526, 5265994, 5265995, 5265996, 5265999, 526599500, 526599600, 526599900
Replaces Sherwood Pump P/N: P1730, P1730X, P1730-01, P1730-02, P1730F-01, P1730F-02, P1730A, P1730C, P1730X, P1731, P1731-01, P1731-02, P1731F-01, P1731F-02, P1731-04
​
For Cummins Engine Model: 6CT, 6BTA, 6CTA Series / 6BTA5.9M2, 6BTA5.9M(JWAC), 6BTA5.9M3(SWAC), 6CT8.3M, 6CT8.3-D(M), 6CTA8.3M, 6CTA8.3M2(SWAC), 6CTA8.3-D(M), 6CTA8.3-M1(JWAC)
​
Parts Internally Compatible to Genuine: NO (changes made to Impeller, Wear Plate, Cam, Mechanical Seal, Shaft for Better Quality & Peformance)
Major Service Kit (All Internal Parts): JSK0067 (*Sold Separately)
Minor Service Kit: JSM0002 (*Sold Separately)
#JPR-G6000F JMP Marine
Replaces Detroit Diesel 5145578, 5145576
Jabsco 17050-0001, 17030
​
Product Information & Specs:
Uses JMP Impeller P/N: 7426-01K
Port Type: Flange 1.0"
Pump Weight (approx): 10.00 lbs (4.55 kg)
Replaces Genuine Detroit Diesel Pump P/N: 5145578, 5145576
Replaces Jabsco Pump P/N: 17050-0001, 17030
​
For Detroit Diesel Engine Model: 253, 353, 453, 471
​
Parts Internally Compatible to Genuine: NO (Changes made to Mechanical Seal, Shaft, and Cover for Better Quality & Performance)
Major Service Kit (All Internal Parts): JSK002301 (*Sold Separately)
Minor Service Kit: JSM0028 (*Sold Separately)
#JPR-G6010F JMP Marine
Replaces Detroit Diesel 5145577, 5115954
Jabsco 17040-0001, 5840-0000
​
Product Information & Specs:
Uses JMP Impeller P/N: 7426-01K
Port Type: Pipe 1.0"
Pump Weight (approx): 11.00 lbs (5.00 kg)
Replaces Genuine Detroit Diesel Pump P/N: 5145577, 5115954
Replaces Jabsco Pump P/N: 17040-0001, 5840-0000, 7260
​
For Detroit Diesel Engine Model: 271
​
Parts Internally Compatible to Genuine: NO (Changes made to Mechanical Seal, Shaft, and Cover for Better Quality & Performance)
Major Service Kit (All Internal Parts): JSK002302 (*Sold Separately)
Minor Service Kit: JSM0028 (*Sold Separately)
#JPR-G6100 JMP Marine
Replaces Detroit Diesel 2313002, 23501083, 23507971, 5107480, 5115396, 5115652, 5137208, 5186250
Jabsco 2570-0051, 2570-3000, 2570-3100
​
Product Information & Specs:
Uses JMP Impeller P/N: 8100-01K
Port Type: Flange 1.50"
Pump Weight (approx): 21.50 lbs (9.78 kg)
Replaces Genuine Detroit Diesel Pump P/N: 2313002, 23501083, 23507971, 5107480, 5115396, 5115652, 5137208, 5186250
Replaces Jabsco Pump P/N: 12570-0051, 2570-3000, 2570-3100
​
For Detroit Diesel Engine Model: 6V53, 6V71, 6V92, 8V53
​
Parts Internally Compatible to Genuine: YES
Major Service Kit (All Internal Parts): JSK0024 (*Sold Separately)
Minor Service Kit: JSM0006 (*Sold Separately)
#JPR-G6200 JMP Marine
Replaces Detroit Diesel 23507972, 23501769, 5106016, 5122599, 8924265
Jabsco 6980-3100
​
Product Information & Specs:
Uses JMP Impeller P/N: 8301-01K
Port Type: Pipe 2.0"
Pump Weight (approx): 21.00 lbs (9.55 kg)
Replaces Genuine Detroit Diesel Pump P/N: 23507972, 23501769, 5106016, 5122599, 8924265
Replaces Jabsco Pump P/N: 6980-3100
​
For Detroit Diesel Engine Model: 6V71TI, 8V71, 12V71, 16V92
​
Parts Internally Compatible to Genuine: YES
Major Service Kit (All Internal Parts): JSK0025 (*Sold Separately)
Minor Service Kit: JSM0029 (*Sold Separately)
.jpg)
#JPR-G6300 JMP Marine
Replaces Detroit Diesel 23507973, 23507475, 23507476, 23507477, 23522698, 8923363
Jabsco 18760-0001, 17367-8000
​
Product Information & Specs:
Uses JMP Impeller P/N: 8300-01K
Port Type: Flange 2.0"
Pump Weight (approx): 33.00 lbs (15.00 kg)
Replaces Genuine Detroit Diesel Pump P/N: 223507973, 23507475, 23507476, 23507477, 23522698, 8923363
Replaces Jabsco Pump P/N: 18760-0001, 17367-8000
​
For Detroit Diesel Engine Model: 8V71, 8V92TA, 8V92TI, 12V71, 16V92TA, Series 60
​
Parts Internally Compatible to Genuine: YES
Major Service Kit (All Internal Parts): JSK0026 (*Sold Separately)
Minor Service Kit: JSM0005 (*Sold Separately)
#JPR-G6400 JMP Marine
Replaces Detroit Diesel 23525078, 8927296
Jabsco 18780-0001
​
Product Information & Specs:
Uses JMP Impeller P/N: 9000-01K
Port Type: Flange 2.0"
Pump Weight (approx): 38.00 lbs (17.27 kg)
Replaces Genuine Detroit Diesel Pump P/N: 23525078, 8927296
Replaces Jabsco Pump P/N: 18780-0001, 18780
​
For Detroit Diesel Engine Model: 12V71TI, 12V92TA, 16V149TA, SERIES 149
​
Parts Internally Compatible to Genuine: YES
Major Service Kit (All Internal Parts): JSK0027 (*Sold Separately)
Minor Service Kit: JSM0004 (*Sold Separately)
#JPR-G6500 JMP Marine
Replaces Detroit Diesel 23525200, 23522735, 23535447
Jabsco 17540-0001, 17540-0201
​
Product Information & Specs:
Uses JMP Impeller P/N: 9000-01K
Port Type: Flange 2.0"
Pump Weight (approx): 39.00 lbs (17.73 kg)
Replaces Genuine Detroit Diesel Pump P/N: 223525200, 23522735, 23535447
Replaces Jabsco Pump P/N: 17540-0001, 17540-0201
​
For Detroit Diesel Engine Model: SERIES 60
​
Parts Internally Compatible to Genuine: YES
Major Service Kit (All Internal Parts): JSK0079 (*Sold Separately)
Minor Service Kit: JSM0004 (*Sold Separately)
#JPR-JD25UH JMP Marine
Replaces John Deere DZ116559, RE535944, RE525563, RE503068
Johnson 10-24753-01, 10-24907-01 (F7B-9)
Onan 132-0435
​
Product Information & Specs:
Uses JMP Impeller P/N: 7400-01K
Port Type: Pipe 2.0"
Pump Weight (approx): 6.25 lbs (3.85 kg)
Shaft Type: Spline Drive (9 Splines)
Replaces Genuine John Deere Pump P/N: DZ116559, RE535944, RE503068, RE525563
Replaces Johnson Pump P/N: 10-24753-01, 10-24907-01 (F7B-9)
Replaces Onan Pump P/N: 132-0435
​
For John Deere Engine Model: 3029, 4045DFM50, 4045DFM70, 4045TFM50, 4045TFM75, 4045TFM85, 6068SFM50,6068TFM50, 6068TFM75, 6068TFM76
Fits Kohler Engine Model: 40E02/33EF02, 65E02/55EF02, 30E02/20EF02, 99E02/80LF02
​
Parts Internally Compatible to Genuine: NO (Changes made to End Cover, O-Ring for Cover,Cover Screw, Cam, Wear Plate, Oil Seal, Mechanical Seal, Shaft for Better Quality & Performance)
Major Service Kit (All Internal Parts): JSK0076 (*Sold Separately)
Minor Service Kit: JSM0024 (*Sold Separately)
#JPR-JD60IF JMP Marine
Replaces John Deere RE530872, RE530689, RE536016, RE524510
Sherwood G1816X
​
Product Information & Specs:
Uses JMP Impeller P/N: 8350-01K
Port Type: Flange 2.0"
Pump Weight (approx): 35.50 lbs (16.14 kg)
Replaces Genuine John Deere Pump P/N(s): RE530872, RE530689, RE536016, RE524510
Replaces Jabsco Pump P/N: G1816X
​
For John Deere Engine Model: 6068SFM75, 6068SFM85, 6068AFM75, 6090AFM75, 6090AFM85, 6090SFM75, 6090SFM85, 6125AFM75, 6125SFM75, 6135SFM75, 6135SFM85, 6135AFM75, 6135AFM85
​
Parts Internally Compatible to Genuine: YES
Major Service Kit (All Internal Parts): JSK0084 (*Sold Separately)
Minor Service Kit: JSM0027 (*Sold Separately)
#JPR-JD60IF2 JMP Marine
Replaces John Deere DZ108620
Sherwood G2910X
​
Product Information & Specs:
Uses JMP Impeller P/N: 8359-01K
Port Type: Flange 2.0"
Pump Weight (approx): 35.50 lbs (16.14 kg)
Shaft Type: Spline Drive (9 Splines)
Replaces Genuine John Deere Pump P/N: DZ108620
Note: with mounting o-ring #74657 can also replace RE30872, RE530689, RE536016, RE524510
​
Replaces Sherwood Pump P/N: G2910X
​
For John Deere Engine Model: 6135AFM75, 6135AFM85, 6135SFM85
Note: with mounting o-ring #74657 includes 6068SFM75, 6068SFM85, 6068AFM75, 6090AFM75, 6090AFM85, 6090SFM75, 6090SFM85, 6125AFM75, 6125SFM75, 6135SFM75, 6135SFM85, 6135AFM75, 6135AFM85
​
Parts Internally Compatible to Genuine: YES
Major Service Kit (All Internal Parts): JSK0080 (*Sold Separately)
Minor Service Kit: JSM0023 (*Sold Separately)
#JPR-S7619 JMP Marine
Replaces John Deere RE45458
Sherwood P1711, P1719, P1719-01, P1719F-01, P1719X
​
Note: If you are looking for the replacement pump to Sherwood P1733X for Engine Model 6068SFM50 please refer to part #JPR-S7633.
JPR-S7633 has the tapered shaft vs JPR-S7619 with spline shaft.
Product Information & Specs:
Uses JMP Impeller P/N: 7608-01K
Port Type: Flange 1.75"
Pump Weight (approx): 13.00 lbs (5.45 kg)
Shaft Type: Spline Drive
Replaces Genuine John Deere Pump P/N: RE45458
Replaces Sherwood Pump P/N: P1719 (Old P1711), P1719-01, P1719F-01, P1719X
​
For John Deere Engine Model: 6076AFM, 6076AFM30, 6125AFM01, 6081AFM01, 6081AFM75, 6081AFH75, 6081HFH70
​
Parts Internally Compatible to Genuine: NO (Changes made to Impeller, Wear Plate, Cam, Mechanical Seal, Shaft for Better Quality & Performance)
Major Service Kit (All Internal Parts): JSK0077 (*Sold Separately)
Minor Service Kit: JSM0002 (*Sold Separately)
#JPR-S7633 JMP Marine
Replaces John Deere RE515657, DZ114697 (old RE517226, RE540399)
Sherwood P1733X
​
Note: If you are looking for the replacement pump to Sherwood P1719 having spline shaft please refer to part #JPR-S7619.
JPR-S7619 has the spline shaft vs JPR-S7633 having tapered shaft.
Product Information & Specs:
Uses JMP Impeller P/N: 7608-01K
Port Type: Flange 1.75"
Pump Weight (approx): 13.50 lbs (6.15 kg)
Replaces Genuine John Deere Pump P/N: RE515657, DZ114697 (old RE517226, RE540399)
Replaces Sherwood Pump P/N: P1733X (replaces Old #P1733F-01)
​
For John Deere Engine Model: 6068SFM50, 4045AFM85, 4045SFM85, 6068AFM75, 6068AFM85
​
Parts Internally Compatible to Genuine: NO (Changes made to Impeller, Wear Plate, Cam, Mechanical Seal, Shaft for Better Performance & Quality)
Major Service Kit (All Internal Parts): JSK0133 (*Sold Separately)
Minor Service Kit: JSM0002 (*Sold Separately)
#JPR-MD65LF JMP Marine
Replaces Mitsubishi 37553-28100, 37555-101N0, 37553-10100
​
Product Information & Specs:
Uses JMP Impeller P/N: 9100-01K
Port Type: Flange 2 1/2"
Pump Size (LxWxH): 295mm x 213mm x 186mm
Pump Weight (approx): 48.50 lbs (22.05 kg)
Replaces Genuine Mitsubishi Pump P/N: 37553-28100, 37555-101N0, 37553-10100
​
For Mitsubishi Engine Model: S6B, S6A, S6R, S6R2
​
Major Service Kit (All Internal Parts): JSK0064 (*Sold Separately)
Minor Service Kit: JSM0021 (*Sold Separately)
​
Drive Gear Options (Sold Separately):
Engine Model S6A3 = Gear #GEA0010 (Mitsubishi 42763-00200)
Engine Model S6B5 = Gear #GEA0026 (Mitsubishi 34A53-01200)
Engine Model S6R, S6R2 = Gear #GEA0019 (Mitsubishi F2330-22005)
#JPR-MD65LF2 JMP Marine
Replaces Mitsubishi 37553-28100, 37555-101N0, 37553-10100
Model with Built-In Cam
​
Product Information & Specs:
Uses JMP Impeller P/N: 9100-01K
Cam Type: Built-In Cam
Port Type: Flange 2 1/2"
Pump Size (LxWxH): 295mm x 213mm x 186mm
Pump Weight (approx): 48.50 lbs (22.05 kg)
Replaces Genuine Mitsubishi Pump P/N: 37553-28100, 37555-101N0, 37553-10100
​
For Mitsubishi Engine Model: S6B, S6A, S6R, S6R2
​
Major Service Kit (All Internal Parts): JSK006401 (*Sold Separately)
Minor Service Kit: JSM002101 (*Sold Separately)
​
Drive Gear Options (Sold Separately):
Engine Model S6A3 = Gear #GEA0010 (Mitsubishi 42763-00200)
Engine Model S6B5 = Gear #GEA0026 (Mitsubishi 34A53-01200)
Engine Model S6R, S6R2 = Gear #GEA0019 (Mitsubishi F2330-22005)
#JPR-ME5000 JMP Marine
Replaces Mitsubishi S6A, S6B, S6R, S6R2
Keel Cooling Application
​
Product Information & Specs:
Uses JMP Impeller P/N: IMP0062
​
For Mitsubishi Engine Model: S6A, S6B, S6R, S6R2
​
Major Service Kit (All Internal Parts): JSK0109 (*Sold Separately)
Minor Service Kit: JSM0109 (*Sold Separately)
​
Drive Gear Options (Sold Separately):
Engine Model S6A3 = Gear #GEA0010 (Mitsubishi 42763-00200)
*See pump #JPR-ME5000A
​
Engine Model S6B5 = Gear #GEA0026 (Mitsubishi 34A53-01200)
*See pump #JPR-ME5000B
​
Engine Model S6R, S6R2 = Gear #GEA0019 (Mitsubishi F2330-22005)
* See pump #JPR-ME5000R
#JPR-ME5000A JMP Marine
Replaces Mitsubishi S6A3
Keel Cooling Application
Mitsubishi Drive Gear p/n 42763-00200
​
Product Information & Specs:
Uses JMP Impeller P/N: IMP0062
Uses Drive Gear P/N: GEA0010 (Mitsubishi 42763-00200)
​
For Mitsubishi Engine Model: S6A3
​
Major Service Kit (All Internal Parts): JSK0109 (*Sold Separately)
Minor Service Kit: JSM0109 (*Sold Separately)
#JPR-ME5000B JMP Marine
Replaces Mitsubishi S6B5
Keel Cooling Application
Mitsubishi Drive Gear p/n 34A53-01200
​
Product Information & Specs:
Uses JMP Impeller P/N: IMP0062
Uses Drive Gear P/N: GEA0026 (Mitsubishi 34A53-01200)
​
For Mitsubishi Engine Model: S6B5
​
Major Service Kit (All Internal Parts): JSK0109 (*Sold Separately)
Minor Service Kit: JSM0109 (*Sold Separately)
#JPR-ME5000R JMP Marine
Replaces Mitsubishi S6R, S6R2
Keel Cooling Application
Mitsubishi Drive Gear p/n F2330-22005
​
Product Information & Specs:
Uses JMP Impeller P/N: IMP0062
Uses Drive Gear P/N: GEA0019 (Mitsubishi F2330-22005)
​
For Mitsubishi Engine Model: S6R, S6R2
​
Major Service Kit (All Internal Parts): JSK0109 (*Sold Separately)
Minor Service Kit: JSM0109 (*Sold Separately)
#JPR-SC50IF JMP Marine
Replaces Scania 1785018
Johnson 10-24308-02
Model with Tapered Shaft
​
Product Information & Specs:
Uses JMP Impeller P/N: 8301-01K
Port Type: Flange 2.0"
Pump Size (LxWxH): 220mm x 152mm x 150mm
Pump Weight (approx): 18.0 lbs (8.18 kg)
Shaft Type: Tapered Shaft Drive
Replaces Genuine Scania Pump P/N: 1785018
Replaces Johnson Pump P/N: 10-24308-02
​
For Scania Engine Model: DI09, DI12, DI13, DI16 Series
​
Parts Internally Compatible to Genuine: NO (Changes made to: End Cover, Cam, Wear Plate, O-Ring for Cover, Shaft, Oil Seal for Better Quality & Performance)
Major Service Kit (All Internal Parts): JSK0028 (*Sold Separately)
Minor Service Kit: JSM0033 (*Sold Separately)
#JPR-SC50IF2 JMP Marine
Replaces Scania D13 Generator Engine
Model with Keyed Shaft Drive
​
Product Information & Specs:
Uses JMP Impeller P/N: 8301-01K
Port Type: Flange 2.0"
Pump Size (LxWxH): 220mm x 152mm x 150mm
Pump Weight (approx): 8.0 lbs (8.18 kg)
Shaft Type: Keyed Shaft Drive
​
For Scania Generator Engine Model: D13
​
Parts Internally Compatible to Genuine: NO (Changes made to: End Cover, Cam, Wear Plate, O-Ring for Cover, Shaft, Oil Seal for Better Quality & Performance)
Major Service Kit (All Internal Parts): JSK002801 (*Sold Separately)
Minor Service Kit: JSM0033 (*Sold Separately)
#JPR-CP25UH JMP Marine
Replaces Sherwood P105
Volvo Penta 3860703, 841640, 856513, 857451
Jabsco 50410-1201
Johnson F6B-9, 10-24232-1, 10-24930-01, 10-24805-01, 10-24076-2, 10-24228-1, 10-24915-1
Northern Lights 25-11030
Indmar 685001, 685001-1, 685001-3, S685001
Marine Power 524520Z
​
Replacement For:
Alaska Diesel, Crusader, Indmar, Jabsco, Johnson, Marine Power, Northern Lights, PCM, Pleasurecraft Marine, Sherwood, Sierra, Seamaxx, Volvo Penta
​
Product Information & Specs:
Uses JMP Impeller P/N: 7136-01K
Port Size: 32mm / 1.25"
Pump Size (LxWxH): 124mm/4.88" x 114mm/4.49" x 117mm/4.61"
Pump Weight (approx): 4.85 lbs (2.20 kg)
Pump Type: Crank Mounted Raw Water Pump
Replaces Volvo Penta Pump P/N: 3860703, 841640, 856513, 857451
Replaces Jabsco Pump P/N: 50410-1201
Replaces Johnson Pump P/N: F6B-9, 10-24232-1, 10-24930-01, 10-24805-01, 10-24076-2, 10-24228-1, 10-24915-1
Replaces Sherwood Pump P/N: P105
Replaces Alaska Diesel Pump P/N: L6414A
Replaces Indmar Pump P/N: P685001, 685001-1, 685001-3, S685001
Replaces Marine Power Pump P/N: 524520Z
Replaces Northern Lights Pump P/N: 25-11030
Replaces Sierra Pump P/N: 18-3587
​
Replaces P/N: Crusader, PCM, Pleasurecraft, Seamaxx RA057023, RA057024, RA057026
Used on Engine Model: Cursader, Indmar, Marine Power, PCM, Volvo Penta & More
Fully Compatible to Genuine: YES
#JPR-V1000 JMP Marine
Replaces Volvo Penta 3583115, 3581558, 860629
Johnson 10-24394-01, 10-24524-01
​
Product Information & Specs:
Uses JMP Impeller P/N: 7400-01K
Port Type: Hose 1.0"
Pump Size (LxWxH): 129mm x 158mm x 90mm
Pump Weight (approx): 6.0 lbs (2.73 kg)
Replaces Volvo Penta Pump P/N: 3583115 (Old 3581558, 860629)
Replaces Johnson Pump P/N: 10-24394-01, 10-24524-01
​
For Volvo Penta Engine Model: AD31/41/43, TAMD31/41/42, KAD32/42/43/44, KAMD42/43/44, MD31, TMD31/41
​
Parts Internally Compatible to Genuine: NO (Changes made: Ball Bearing, Screw for Cover, Cam, Screw for Cam, Gasket for Cam, End Cover, Mechanical Seal, O-Ring for End Cover, Oil Seal, Shaft, Small Snap Ring for Better Quality & Peformance)
Major Service Kit (All Internal Parts): JSK0085 (*Sold Separately)
Minor Service Kit: JSM0030 (*Sold Separately)
#JPR-V2000 JMP Marine
Replaces Volvo Penta 3829311, 822787, 846354
Johnson 10-21915-01
​
Product Information & Specs:
Uses JMP Impeller P/N: 8100-01K
Port Type: Flange 1.50"
Pump Size (LxWxH): 222mm x 152mm x 130mm
Pump Weight (approx): 18.50 lbs (8.41 kg)
Replaces Volvo Penta Pump P/N: 3829311 (Old 846354), 822787
Replaces Johnson Pump P/N: 10-21915-01
​
For Volvo Penta Engine Model: TAMD61/62, TAMD71/72/73, MD100/120, TD100/120, TMD100/120, TAMD100/102/120
​
Parts Internally Compatible to Genuine: YES
Major Service Kit (All Internal Parts): JSK0029 (*Sold Separately)
Minor Service Kit: JSM0007 (*Sold Separately)
#JPR-V3000 JMP Marine
Replaces Volvo Penta 3829313, 3583112, 3829312
​
Product Information & Specs:
Uses JMP Impeller P/N: 8301-01K
Port Type: Flange 2.0"
Pump Size (LxWxH): 244mm x 152mm x 147mm
Pump Weight (approx): 21.50 lbs (9.8 kg)
Replaces Volvo Penta Pump P/N: 3829313 (Old 866396), 3583112 (Old 845189), 3829312
​
For Volvo Penta Engine Model: TAMD120/121/122, TMD102A, TAMD102A, TAMD102D, TAMD103A-A, TAMD122A,TMD122A, TAMD122P-A, TAMD122P-B, TAMD122P-C
​
Parts Internally Compatible to Genuine: YES
Major Service Kit (All Internal Parts): JSK0030 (*Sold Separately)
Minor Service Kit: JSM0031 (*Sold Separately)
#JPR-V5000 JMP Marine
Replaces Volvo Penta 3837935, 3825493
Johnson 10-13166-01
​
Product Information & Specs:
Uses JMP Impeller P/N: 8301-01K
Port Type: Flange 2.0"
Pump Size (LxWxH): 273mm x 201mm x 180mm
Pump Weight (approx): 25.75 lbs (11.70 kg)
Replaces Volvo Penta Pump P/N: 3837935 (Old 3825493)
Replaces Johnson Pump P/N: 10-13166-01
​
For Volvo Penta Engine Model: TAMD162, TAMD163, TAMD165
​
Parts Internally Compatible to Genuine: NO (Changes Made: Screw for Cam, Gasket for Cam, End Cover, O-Ring for Cover for Better Quality & Performance)
Major Service Kit (All Internal Parts): JSK0048 (*Sold Separately)
Minor Service Kit: JSM0032 (*Sold Separately)
#JPR-VP0010DA JMP Marine
Replaces Volvo Penta 3593654
Johnson 10-24751-01
​
Product Information & Specs:
Uses JMP Impeller P/N: 7051-01K
Pump Weight (approx): 3.0 lbs (1.36 kgs)
Replaces Volvo Penta Pump P/N: 3593654
Replaces Johnson Pump P/N: 10-24751-01
​
For Volvo Penta Engine Model: D1 SERIES (D1-13A/B/F, D1-20A/B/F), MD2010A, MD2010B, MD2010-C, MD2020A, MD2020B, MD2010-D, MD2020-C, MD2020-D, 120S-D, 120S-E, MS2B-R, MS2A-D, MS2A-E, MS2L-D, MS2L-E
​
Parts Internally Compatible to Genuine: YES
Major Service Kit (All Internal Parts): JSK0091 (*Sold Separately)
Minor Service Kit: JSM0072 (*Sold Separately)
#JPR-VP0010DB JMP Marine
Replaces Volvo Penta 3593655, 3580945
Johnson 10-24752-01, 10-24465-01
Jabsco 29450-1231
Ancor ST123, AN701
​
Product Information & Specs:
Uses JMP Impeller P/N: 7051-01K
Pump Weight (approx): 3.50 lbs (1.60 kg)
Replaces Volvo Penta Pump P/N: 3593655, 3580945 (replaced by 3593655)
Replaces Johnson Pump P/N: 10-24752-01, 10-24465-01 (replaced by 10-24752-01)
Replaces Jabsco Pump P/N: 29450-1231
Replaces Ancor Pump P/N: ST123, AN701
​
For Volvo Penta Engine Model: D1/D2 SERIES (D1-30A/B/F, D2-40A/B/F), MD2030A, MD2030B, MD2030-C, MD2030-D, MD2040A, MD2040B, MD2040-C, MD2040-D
​
Parts Internally Compatible to Genuine: YES
Major Service Kit (All Internal Parts): JSK0092 (*Sold Separately)
Minor Service Kit: JSM0073 (*Sold Separately)
#JPR-VP0020D JMP Marine
Replaces Volvo Penta 3583089
Johnson 10-13283
Ancor ST347, AN5893
​
Product Information & Specs:
Uses JMP Impeller P/N: 7100-01K
Pump Weight (approx): 4.25 lbs (1.93 kg)
Replaces Volvo Penta Pump P/N: 3583089
Replaces Johnson Pump P/N: 10-13283
Replaces Ancor Pump P/N: ST347, AN5893
​
For Volvo Penta Engine Model: D2 SERIES (D2-55A/B/C/D/E/F, D2-75A/B/C/F)
​
Parts Internally Compatible to Genuine: YES
Major Service Kit (All Internal Parts): JSK0093 (*Sold Separately)
Minor Service Kit: JSM0074 (*Sold Separately)
#JPR-VP0030DA JMP Marine
Replaces Volvo Penta 21141637
​
Note: There are 2 versions out there . . . the old version and the new:
"Old version" - all 3 mounting holes are threaded
"New Version" - 2 of the 3 mounting holes are threaded
(this is #JPR-VP0030DA)
​
Product Information & Specs:
Uses JMP Impeller P/N: 7136-01K
Port Type: Hose 1.25" / 32mm
Pump Weight (approx): 7.25 lbs (3.30 kg)
Replaces Volvo Penta Pump P/N: 21141637
​
For Volvo Penta Engine Model: D3 SERIES (D3-110I, D3-130A/I, D3-160A/I, D3-190A/I, D3-110I-A, D3-130A-A, D3-130I-A, D3-160A-A, D3-160I-A)
​
Parts Internally Compatible to Genuine: YES
Major Service Kit (All Internal Parts): JSK0094 (*Sold Separately)
Minor Service Kit: JSM0075 (*Sold Separately)
#JPR-VP0030DB JMP Marine
Replaces Volvo Penta 21379102
​
Product Information & Specs:
Uses JMP Impeller P/N: 7136-01K
Port Type: Hose 1.25" / 31.5mm
Pump Weight (approx): 8.0 lbs (3.64 kg)
Replaces Volvo Penta Pump P/N: 21379102
​
For Volvo Penta Engine Model: D3 SERIES (D3-110I-G, D3-140A, D3140I, D3-150I-G, D3-170A-G, D3170I-G, D3-200A-G, D3200I-G, D3-220A-G, D3220I-G)
​
Parts Internally Compatible to Genuine: YES
Major Service Kit (All Internal Parts): JSK0100 (*Sold Separately)
Minor Service Kit: JSM0081 (*Sold Separately)
#JPR-VP0040DA JMP Marine
Replaces Volvo Penta 3584062
Jabsco 50384-8000
​
Product Information & Specs:
Uses JMP Impeller P/N: 7426-01K
Pump Weight (approx): 14.0 lbs (6.36 kg)
Replaces Volvo Penta Pump P/N: 3584062
Replaces Jabsco Pump P/N: 50384-8000
​
For Volvo Penta Engine Model: D4 SERIES (D4-210, D4-225, D4-260, D4-300)
​
Parts Internally Compatible to Genuine: YES
Major Service Kit (All Internal Parts): JSK0101 (*Sold Separately)
Minor Service Kit: JSM0101 (*Sold Separately)
#JPR-VP0040DB JMP Marine
Replaces Volvo Penta 21419374, 22901573
​
Product Information & Specs:
Uses JMP Impeller P/N: 7400-01K
Pump Weight (approx): 8.50 lbs (3.86 kg)
Replaces Volvo Penta Pump P/N: 21419374, 22901573
​
For Volvo Penta Engine Model: D4 SERIES (D4-225A-E, D4-260A-E, D4-260D-E, D4-300A-E, D4-300D-E)
​
Parts Internally Compatible to Genuine: YES
Major Service Kit (All Internal Parts): JSK0098 (*Sold Separately)
Minor Service Kit: JSM0080 (*Sold Separately)
#JPR-VP0050D JMP Marine
Replaces Volvo Penta 3838288
Johnson 10-24580-01
​
Product Information & Specs:
Uses JMP Impeller P/N: 7400-01K
Pump Weight (approx): 8.0 lbs (3.64 kg)
Replaces Volvo Penta Pump P/N: 3838288
Replaces Johnson Pump P/N: 10-24580-01
​
For Volvo Penta Engine Model: D5 / D7 SERIES (D5A-A T/TA, D7A-A T/TA, D7C-A TA, D7A-B TA, D7C-B TA)
​
Parts Internally Compatible to Genuine: YES
Major Service Kit (All Internal Parts): JSK0099 (*Sold Separately)
Minor Service Kit: JSM0079 (*Sold Separately)
#JPR-VP0060DA JMP Marine
Replaces Volvo Penta 21380890, 3589907
Jabsco 50394-8300
​
Product Information & Specs:
Uses JMP Impeller P/N: 7446-01K
Pump Weight (approx): 14.50 lbs (6.59 kg)
Replaces Volvo Penta Pump P/N: 21380890, 3589907
Replaces Johnson Pump P/N: 50394-8300
​
For Volvo Penta Engine Model: D6 SERIES (D6-280A, D6-310A, D6-310D, D6-330A, D6-330D, D6-350A, D6-370A, D6-370D, D6-435D)
​
Parts Internally Compatible to Genuine: YES
Major Service Kit (All Internal Parts): JSK0102 (*Sold Separately)
Minor Service Kit: JSM0102 (*Sold Separately)
#JPR-VP0060DB JMP Marine
Replaces Volvo Penta 21419376, 22901578
​
Product Information & Specs:
Uses JMP Impeller P/N: 7376-01K
Pump Weight (approx): 11.50 lbs (5.23 kg)
Replaces Volvo Penta Pump P/N: 21419376, 22901578
​
For Volvo Penta Engine Model: D6 SERIES (D6-280A, D6-310A, D6-310D, D6-330A, D6-330D, D6-370A, D6-370D, D6-435D)
​
Parts Internally Compatible to Genuine: YES
Major Service Kit (All Internal Parts): JSK0103 (*Sold Separately)
Minor Service Kit: JSM0084 (*Sold Separately)
#JPR-VP0090D JMP Marine
Replaces Volvo Penta 21380886, 3819485
​
Product Information & Specs:
Uses JMP Impeller P/N: 7446-01K
Pump Weight (approx): 22.79 lbs (10.36 kg)
Replaces Volvo Penta Pump P/N: 21380886, 3819485
​
For Volvo Penta Engine Model: D9 / D11 SERIES (D9A2A D9-425, D9-500, D9-500 (R4), D9-575, D9A2B D9-425, D9-500 (R5), D9A2A D9A-MH, D9A2B D9-575, D9A2A MH, D9A2B MH, D9A2C D9A-MH, D9-425, D9A2D D9-500 (R5), D9A2E D9-425, D9A2F D9-575, D9A2A MP, D9A2B MP, D9A2C, D9A2D, D9A2E, D9A2F, D9A2G, D9A2H, D9A2J, D9A-J, D9A-K, D9A2K, D9A2K D9-575,D11A-A, D11A-B, D11A-C, D11A-D, D11A-C (IPS), 11A-D (IPS), D11A-E, D11A-E (IPS))
​
Parts Internally Compatible to Genuine: YES
Major Service Kit (All Internal Parts): JSK0104 (*Sold Separately)
Minor Service Kit: JSM0077 (*Sold Separately)
#JPR-VP0110DA JMP Marine
Replaces Volvo Penta 21219723
​
Product Information & Specs:
Uses JMP Impeller P/N: 8000-01K
Pump Weight (approx): 25.0 lbs (11.36 kg)
Replaces Volvo Penta Pump P/N: 21219723
​
For Volvo Penta Engine Model: D11 SERIES (D11A-A, D11A-B, D11A-C, D11A-D, D11A-C MP, D11A-C (IPS), D11A-D MP, D11A-D (IPS), D11A-E, D11A-E MP, D11A-E (IPS), D11B1-A MP, D11B2-A MP, D11B2-A MP (IPS), D11B3-A MP, D11B4-A MP)
​
Parts Internally Compatible to Genuine: YES
Major Service Kit (All Internal Parts): JSK0105 (*Sold Separately)
Minor Service Kit: JSM0085 (*Sold Separately)
#JPR-VP0110DB JMP Marine
Replaces Volvo Penta 22063494
​
Product Information & Specs:
Uses JMP Impeller P/N: 7446-01K
Pump Weight (approx): 22.50 lbs (10.33 kg)
Replaces Volvo Penta Pump P/N: 22063494
​
For Volvo Penta Engine Model: D11 SERIES (D11B1-A MP, D11B2-A MP (IPS), D11B3-A MP, D11B4-A MP)
​
Parts Internally Compatible to Genuine: YES
Major Service Kit (All Internal Parts): JSK0106 (*Sold Separately)
Minor Service Kit: JSM0086 (*Sold Separately)
#JPR-VP0120D JMP Marine
Replaces Volvo Penta 3838207, 865295
Jabsco 29830-0001
​
Product Information & Specs:
Uses JMP Impeller P/N: 8326-01K
Pump Weight (approx): 28.0 lbs (12.73 kg)
Replaces Volvo Penta Pump P/N(s): 3838207, 865295
Replaces Jabsco Pump P/N: 29830-0001
​
For Volvo Penta Engine Model: D12 SERIES (D12C/D, D12D-A MH, D12D-B MH, D12D-C MH, D12C-A MP, D12D-A MP, D12D-B MP, D12D-C MP, D12D-D MP, D12D-E MP, D12D-F MP, D12D-G MP, D12D-H MP)
​
Parts Internally Compatible to Genuine: YES
Major Service Kit (All Internal Parts): JSK0095 (*Sold Separately)
Minor Service Kit: JSM0076 (*Sold Separately)
#JPR-VP0130D JMP Marine
Replaces Volvo Penta 22905150, 3886848
​
Product Information & Specs:
Uses JMP Impeller P/N: 8326-01K
Pump Weight (approx): 23.50 lbs (15.23 kg)
Replaces Volvo Penta Pump P/N: 22905150, 3886848
​
For Volvo Penta Engine Model: D13 SERIES (D13B/C, D13C1-A MP, D13C2-A MP, D13C3-A MP, D13C4-A MP)
​
Parts Internally Compatible to Genuine: YES
Major Service Kit (All Internal Parts): JSK0096 (*Sold Separately)
Minor Service Kit: JSM0076 (*Sold Separately)
#JPR-VP0160D JMP Marine
Replaces Volvo Penta 22905155, 3589104
​
Product Information & Specs:
Uses JMP Impeller P/N: 8326-01K
Pump Weight (approx): 34.50 lbs (15.68 kg)
Replaces Volvo Penta Pump P/N: 22905155, 3589104
​
For Volvo Penta Engine Model: D16 SERIES (D16C-A/C, D16C-A MG, D16C-A MH, D16C-B MH, D16C-C MH)
​
Parts Internally Compatible to Genuine: YES
Major Service Kit (All Internal Parts): JSK0075 (*Sold Separately)
Minor Service Kit: JSM0076 (*Sold Separately)
#JPR-VP2799G JMP Marine
Replaces Volvo Penta 21212799
Johnson 10-13470-01
​
Product Information & Specs:
Uses JMP Impeller P/N: 7136-01K
Pump Weight (approx): 5.0 lbs (2.28 kg)
Pump Body Type: Short Hose
Pulley Type: Serpentine Belt Pulley, 1 Groove
Replaces Volvo Penta Pump P/N: 21212799
Replaces Johnson Pump P/N: 10-13470-01
​
For Volvo Penta Gasoline Engine Model: V6/V8 SERIES4.3/5.0GL, 4.3/5.0/5.7GXi, 5.7Gi, V6-200/225, V8-225/270/300/350
​
Parts Internally Compatible to Genuine: YES
#JPR-VP2800G JMP Marine
Replaces Volvo Penta 21212800
Johnson 10-13470-03
​
Product Information & Specs:
Uses JMP Impeller P/N: 7136-01K
Pump Weight (approx): 3.85 lbs (1.75 kg)
Pump Body Type: Short Hose
Pulley Type: Beltless Pulley Crankshaft Mounted Pump
Replaces Volvo Penta Pump P/N: 21212800
Replaces Johnson Pump P/N: 10-13470-03
​
For Volvo Penta Gasoline Engine Model: 8.1L SERIES: 8.1L, 8.1Gi, 8.1IPS
​
Parts Internally Compatible to Genuine: YES
#JPR-VP4596G JMP Marine
Replaces Volvo Penta 21214596, 3862487, 3858229, 3812697
Johnson 10-13469-01
​
Product Information & Specs:
Uses JMP Impeller P/N: 7100H-01K
Pump Weight (approx): 5.0 lbs (2.28 kg)
Pump Body Type: Long Hose
Pulley Type: V Belt Pulley, 2 Groove
Replaces Volvo Penta Pump P/N: 21214596 (old p/n(s): 3862487, 3858229, 3812697)
Replaces Johnson Pump P/N: 10-13469-01
​
For Volvo Penta Gasoline Engine Model: 4.3, 5.0, 5.7, 4.3GL, 5.0GL, 5.7GL
​
Parts Internally Compatible to Genuine: YES
#JPR-VP4599G JMP Marine
Replaces Volvo Penta 21214599, 3862482, 3812693
Johnson 10-13468-01
​
Product Information & Specs:
Uses JMP Impeller P/N: 7100H-01K
Pump Weight (approx): 5.0 lbs (2.28 kg)
Pump Body Type: Long Hose
Pulley Type: Serpentine Belt Pulley, 1 Groove
Replaces Volvo Penta Pump P/N: 21214599 (old p/n(s): 3862482, 2812693)
Replaces Johnson Pump P/N: 10-13468-01
​
For Volvo Penta Gasoline Engine Model: 3.0, 4.3L, 5.0L, 5.7L
​
Parts Internally Compatible to Genuine: YES
#JPR-VP4601G JMP Marine
Replaces Volvo Penta 21214601, 3860795, 3862484, 3812695
Johnson 10-13468-03
​
Product Information & Specs:
Uses JMP Impeller P/N: 7100H-01K
Pump Weight (approx): 4.0 lbs (1.82 kg)
Pump Body Type: Long Hose
Pulley Type: Beltless Pulley Crankshaft Mounted Pump
Replaces Volvo Penta Pump P/N: 21214601 (old p/n(s): 3860795, 3862484, 3812695)
Replaces Johnson Pump P/N: 10-13468-03
​
For Volvo Penta Gasoline Engine Model: 8.1L, V8
​
Parts Internally Compatible to Genuine: YES
#JPR-VP5090G JMP Marine
Replaces Volvo Penta 21255090
​
Product Information & Specs:
Uses JMP Impeller P/N: 7136-01K
Pump Weight (approx): 4.85 lbs (2.20 kg)
Pump Body Type: Short Hose
Pulley Type: V Belt Pulley, 2 Groove
Replaces Volvo Penta Pump P/N: 21255090
​
For Volvo Penta Gasoline Engine Model: 4.3L, 5.0L SERIES (4.3GL-E, 4.3GL-EF, 5.0GL-F, 5.0GL-FF)
​
Parts Internally Compatible to Genuine: YES
#JPR-YM04JHA JMP Marine
Replaces Yanmar 129670-42513, 129670-42500, 129670-42501, 129670-42510, 129670-42511, 129670-42512
Johnson 10-13328-04, 10-13328-02
​
Product Information & Specs:
Uses JMP Impeller P/N: 7100-01K
Port Type: Hose
Pump Weight (approx): 5.5 lbs (2.50 kg)
Replaces Genuine Yanmar Pump P/N: 129670-42513 (Replaces: 129670-42500, 129670-42501, 129670-42510, 129670-42511, 129670-42512)
Replaces Johnson Pump P/N: 10-13328-04, 10-13328-02
​
For Yanmar Engine Model: 3JH3, 4JH3, 4JH4 SERIES 90 degree Elbow
​
Parts Internally Compatible to Genuine: YES
Major Service Kit (All Internal Parts): JSK0130 (*Sold Separately)
Minor Service Kit: JSM0130 (*Sold Separately)
#JPR-YM04JHB JMP Marine
Replaces Yanmar 129271-42502, 12971-42500, 12971-42501
Johnson 10-13328-01, 10-13328-03
​
Product Information & Specs:
Uses JMP Impeller P/N: 7100-01K
Port Type: Hose
Pump Weight (approx): 5.5 lbs (2.50 kg)
Replaces Genuine Yanmar Pump P/N: 129271-42502 (Replaces: 129271-42500, 129271-42501)
Replaces Johnson Pump P/N: 10-13328-01, 10-13328-03
​
For Yanmar Engine Model: 3JH4, 3JH5, 4JH4, 4JH5 SERIES180 Degree Elbow
​
Parts Internally Compatible to Genuine: YES
Major Service Kit (All Internal Parts): JSK0130 (*Sold Separately)
Minor Service Kit: JSM0130 (*Sold Separately)
#JPR-YM06LPA JMP Marine
Replaces Yanmar 119773-42502, 119773-42501, 119773-42500, 119773-42650
Johnson 10-24493-02, 10-24493
​
Note: For pump model NOT including the Intake & Outlet Port Housing . . . refer to #JPR-YM06LPB
​
Product Information & Specs:
Uses JMP Impeller P/N: 7136-01K
Port Type: Hose
Pump Weight (approx): 10.0 lbs (4.55 kg)
Replaces Genuine Yanmar Pump P/N: 119773-42502, 119773-42501, 119773-42500, 119773-42650
Replaces Johnson Pump P/N: 10-24493-02, 10-24493
​
For Yanmar Engine Model: 6LP SERIES (6LP(A)-DTE(P), 6LP(A)-STE(P), 6LPA-STP2)
​
Parts Internally Compatible to Genuine: YES
Major Service Kit (All Internal Parts): JSK0129 (*Sold Separately)
Minor Service Kit: JSM0129 (*Sold Separately)
#JPR-YM06LPB JMP Marine
Replaces Yanmar 119773-42652, 119773-42650, 119773-42501, 119773-42500
Johnson 10-24493-01, 10-24493
​
Note: For pump model including the Intake & Outlet Port Housing . . . refer to #JPR-YM06LPA
​
Product Information & Specs:
Uses JMP Impeller P/N: 7136-01K
Port Type: Hose
Pump Weight (approx): 6.0 lbs (2.72 kg)
Replaces Genuine Yanmar Pump P/N: 119773-42652 (Replaces 119773-42650), 119773-42501, 119773-42500
Replaces Johnson Pump P/N: 10-24493-01, 10-24493
​
For Yanmar Engine Model: 6LP SERIES (6LP(A)-DTE(P), 6LP(A)-STE(P), 6LPA-STP2, 6LP(A)-DTZE(P), 6LP(A)-STZE(P), 6LPA-STZP2(3))
​
Parts Internally Compatible to Genuine: YES
Major Service Kit (All Internal Parts): JSK0129 (*Sold Separately)
Minor Service Kit: JSM0129 (*Sold Separately)
#JPR-YM06LY2 JMP Marine
Replaces Yanmar 119574-42502
Johnson 10-13170-01
​
Product Information & Specs:
Uses JMP Impeller P/N: 7136-01K
Port Type: Hose
Pump Weight (approx): 13.50 lbs (6.15 kg)
Replaces Genuine Yanmar Pump P/N: 119574-42502
Replaces Johnson Pump P/N: 10-13170-01
​
For Yanmar Engine Model: 6LY2 SERIES (6LY2-ST, 6LY2-STVY, 6LY2-WST, 6LY2-WDT, 6LY2-WDTZY, 6LY2M-WDT, 6LY2M-WST, 6LYA-STP, 6LYA-STE, 6LYA-UTE, 6LY2-STE, 6LY2A-STP, 6LY2A-UT)
​
Parts Internally Compatible to Genuine: YES
Major Service Kit (All Internal Parts): JSK0128 (*Sold Separately)
Minor Service Kit: JSM0128 (*Sold Separately)
#JPR-YM06LY3 JMP Marine
Replaces Yanmar 119578-42501
Johnson 10-13286-01
​
Product Information & Specs:
Uses JMP Impeller P/N: 7376-01K
Port Type: Hose
Pump Weight (approx): 13.25 lbs (6.0 kg)
Replaces Genuine Yanmar Pump P/N: 119578-42501
Replaces Johnson Pump P/N: 10-13286-01
​
For Yanmar Engine Model: 6LY3 SERIES (6LY3-ETP, 6LY3-STP, 6LY3-UTP, 6LY3-STC, 6LY3-UTC, 6LY3-ETP 24, 6LY3-STP 24, 6LY3-UTP 24, 6LY3-STC 24, 6LY3-UTC 24)
​
Parts Internally Compatible to Genuine: YES
Major Service Kit (All Internal Parts): JSK0127 (*Sold Separately)
Minor Service Kit: JSM0127 (*Sold Separately)
#JPR-YM08IH JMP Marine
Replaces Yanmar 128397-42500, 128990-42500
Johnson 10-24509-01, 10-13337-01, F4B-903
​
What is the internal difference between JPR-YM08IH and model JPR-YM08IH2?
The difference is the thickness of the machined "Cam" which is incorporated or part of the Body / Casing itself.
The machined thickness of YM08IH is greater (4mm) vs a smaller thickness (2mm) found in the JPR-YM08IH2. So the JPR-YM08IH model gives higher flow rate vs JPR-YM08IH2.
This is why it is very important to order the correct pump for your model of engine by referring to the cross-reference information provided.
​
Product Information & Specs:
Uses JMP Impeller P/N: 7050-01K
Port Type (Inside): Hose 1/2"
Port Type (Outside ): Hose 3/4" Approx .
Pump Size (LxWxH): 91mm x 114mm x 76mm
Pump Weight (approx): 4.0 lbs (1.82 kg)
Replaces Genuine Yanmar Pump P/N: 128397-42500, 128990-42500
Replaces Johnson Pump P/N: 10-24509-01, 10-13337-01, F4B-903
​
For Yanmar ngine Model: 62GMF, 3GMF, 2YM, 3YM
​
Parts Internally Compatible to Genuine: NO (Mechanical Seal, Ball Bearing, Shaft, Machined Steel Pulley (Washer & Nut Included) for better quality and performance)
Major Service Kit (All Internal Parts): JSK0082 (*Sold Separately)
Minor Service Kit: JSM0091 (*Sold Separately)
#JPR-YM08IH2 JMP Marine
Replaces Yanmar 128377-42500
Johnson 10-24509-02, F4B-902
​
PLEASE NOTE:
JPR-YM08IH2 is ONLY for 2GM or 3GM as per the cross-reference part numbers in product information below. This should NOT be confused with 2GMF or 3GMF models. If you have the 2GMF or 3GMF please refer to JPR-YM08IH and its cross-reference information. If still unsure please contact us with your question.
You must use JPR-YM08IH2 pump model to replace Yanmar 128377-42500 as there is a difference in revolutions per minute vs the JPR-YM08IH (Flow rate of JPR-YM08IH is greater vs JPR-YM08IH2) which some have thought is good for both this Yanmar number and 128397-42500 . . . this is not true. Use JPR-YM08IH2 to replace Yanmar 128377-42500.
​
What is the internal difference between JPR-YM08IH and model JPR-YM08IH2?
The difference is the thickness of the machined "Cam" which is incorporated or part of the Body / Casing itself.
The machined thickness of YM08IH is greater (4mm) vs a smaller thickness (2mm) found in the JPR-YM08IH2. So the JPR-YM08IH model gives higher flow rate vs JPR-YM08IH2.
This is why it is very important to order the correct pump for your model of engine by referring to the cross-reference information provided.
Product Information & Specs:
Uses JMP Impeller P/N: 7050-01K
Port Type (Inside): Hose 1/2"
Port Type (Outside ): Hose 3/4" Approx.
Pump Size (LxWxH): 91mm x 114mm x 76mm
Pump Weight (approx): 4.0 lbs (1.82 kg)
Replaces Genuine Yanmar Pump P/N: 128377-42500
Replaces Johnson Pump P/N: 10-24509-02, F4B-902
​
For Yanmar Engine Model: 2GM, 3GM
​
Parts Internally Compatible to Genuine: NO (Mechanical Seal, Ball Bearing, Shaft, Machined Steel Pulley (Washer & Nut Included) for better quality and performance)
Major Service Kit (All Internal Parts): JSK0082 (*Sold Separately)
Minor Service Kit: JSM0091 (*Sold Separately)